TOZEN Model PTM-GP vibration isolator is one-piece moulded neoprene with one cast-in load transfer steel plate
at the top and baseplate at the bottom. The rubber is loaded in both shear and compression to provide the
desirable straight line rubber-in-shear deflection curves as well as overload protection. The rubber ribbedbaseplate provides skid resistance and need not be bolted to the floor on most installations. The standardneoprene rubber is oil resistant and had been designed to operate within the strain limits of the isolator to providethe maximum isolation and longest expectancy. Model PTM-GP is available in 9 sizes with load capacity from 30Kgs to 450 Kgs. Standard static deflection of PTM-GP is 8-10mm.
APPLICATION
TOZEN PTM-GP rubber floor mounted can be used to isolate noise and high frequency vibration generated bymechanical equipments located on a grade supported structual slab or pier.Model PTM-GP is recommended for the isolation of vibration produced by small pumps, vent sets, low pressurepackaged air handling units, etc., and usually selected when first cost must be minimized