Specification of Fluoropolymer Flexible Joint Rubber Covered Type U-Flex
Fluoropolymer Flexible Joint Rubber Covered Type U-Flex
Feature
Multiple feature
Composite material complement the feature of each other. Fluoropolymer liner for chemical and heat resistance, and rubber cover for vibration absorption.
Pressure Resistance
Besides the fluoropolymer liner, the tire cord withstanding internal pressure.
Maximum design pressure is up to 1.6MPa, (16.3kgf/cm2), and a negative-pressure of minus 0.086MPa, (minus 650mmHg).
Safety
The exterior rubber absorbs unexpected impacts and protection cover is not
required for exposed applications.
Hot-water supply line
Fluoropolymer liner with a maximum operating temperature of up to 100°C.
U-FLEX is suitable for hot-water supply application without any contamination.
Installation
Pump installation, such as hot-water supply lines, chemical lines, and pure
water lines.
Operating Conditions and Performance
Use after confirmation that maximum operation pressure and maximum service
temperature is within the operation range.
When using outside the operation range, a control unit is necessary.Please refer to
TOZEN website.
Mass is the data when material is SS400, and flange is JIS10K flange.
Use a joint within the range of allowable displacement.
Fixing allowable dimension is included in allowable displacement (allowable displacement = fixing time displacement + operation displacement).
Each displacement in chart are data of single displacement, so for multiple displacements, correction is necessary .For correction method, refer to “Attention for handling or “TOZEN HP”.
Referring to “fixing bolt dimension table” , and use fixing bolt. Nut is not necessary. (When companion flange is JIS 10K, material is SS400, and when plain washer and gasket are not used).
